NETCONNECT CL Adaptors
- Protected labelling facility
- LJ6C version can be used in floorboxes and faceplates
- For use with NETCONNECT CL series jacks
CommScope
CommScope designs and manufactures the gold standard for structured cabling. From twisted-pair copper cabling to multimode and singlemode fibre optics, their cables meet or exceed all published standards. Whether you require the latest high-performance Cat6A cabling for your business premises or the newest OM5 wideband multimode fibre optics for your data centre, CommScope provides dependable high-performance cabling infrastructure that will last long into the future.
Shop by Brand
1547 products found in 292 groups.
NETCONNECT Cat5e Highband Modules
- Highband 8 module supports 2 x 4 pair cables in and 2 x 4 pair cables out with disconnection contacts in between for testing or patching
- Highband 16 module supports 4 x 4 pair cables in and 4 x 4 pair cables out with no facility for testing or patching
- Highband 10 module supports 10 pairs in and 10 pairs out with disconnection contacts in between for testing and patching
NETCONNECT Patch Panel Outrigger
- Supports patch panels in front of the rack for ease of termination
- Attaches to standard 19 Inch racks
- 'Comb' strip dresses cables in to position
NETCONNECT Highband Label Holders
- Recommended for patched environments
- For use with Highband modules
- 20.6mm x 107.9mm x 22.2mm
CommScope Internal Box Connection 201D
- Deep lid version available for where over voltage protection is required
- Complete with 10pr disconnection strips
- IDC and screw terminal earthing strip
CommScope LSA-Profil Disconnection strips
- LSA-PLUS modules mount on back mount frames
- Suitable for use in all xDSL and ADSL2+ circuits
CommScope Disconnection Strips 237A
- Individually numbered pairs for easy identification
- Up to two wires in each contact
- Accepts solid or stranded conductors
CommScope Designation Strips 51A
- Clips onto the top of 10pr and ABS modules
- Hinged to allow access to the module without removal
- Paper labels are protected by a clear plastic cover
CommScope Disconnection Strips ABS
- Provides a means of individual screen termination and continuation
CommScope Designation Strips 53A
- Occupies one tag position on a standard 10pr backmount frame
- Large writing area for identification of a group of modules
- Reversible plastic labels suitable for write on/wipe off
CommScope Designation Strip 53A Labels
- Write on/wipe off surface
CommScope Locking Wedges
- 23A - Single pair disconnection of jumper wires from permanent wires. Provides temporary disconnection of lines for maintenance or pre going live
- 24A - Single pair marking or priority circuits. Prevents disconnection of priority circuits and use of test/patch plugs. Cannot be removed without use of a tool
- 25A - Disconnection of all 10prs on a module. Provides temporary disconnection of lines for maintenance or pre going live. Can be daisy chained for multiple cut-over
CommScope Marking Numbers
- Fit on the top of the 10pr modules
- Can be fitted on the left or right hand side
- Available in sets marked 0-9 or 10-100
CommScope Marking Caps
- For identification of priority circuits
CommScope Line Adaptors
- Allow analogue telephones and modems with BT plugs to be connected to Ethernet wall sockets
- Plugs directly into work area outlet
- Easy to fit and remove
CommScope 5 Point Overvoltage Protection Kit
- Protects from damage caused by overvoltage
- Designed for use in exchanges and terminal equipment in analogue and ISDN (<2MBps) systems
- Includes earthing rail
CommScope Earth Clip
- Provides a low impedance path to earth
- 2 clips required for each LSA PROFIL module
- Easy to fit and remove
NETCONNECT Inserter Wire 2A
- Can be used for all LSA-Plus series modules, jacks, patch panels and highband
- Sensor version ensures the conductor is fully inserted into the contact before allowing excess wire to be cut off
NETCONNECT Fibre Patch Panels - Sliding
- Pre-installed dust covers on unpopulated ports
- Includes management and metric glands
- Supplied without splicing tray
NETCONNECT Fibre Wall Outlets
- LC, SC and ST multimode and LC singlemode options
- Integrated cable management
- Mount on standard (BS4660) double gang back boxes
Shop by code
Enter the product code here to find your product: