Ultima LC Attenuators
- Fixed male-female LC/UPC singlemode
- 1-20dB options available
- Accurate attenuation by using doped fibre technology
Ultima
Ultima is a proven reliable and cost effective end-to-end networking solution backed by a 25 year warranty. The range includes Copper Cat5e, Cat6 and Cat6A solutions as well as Fibre Optic and Voice Cabling systems and a range of cabling accessories.
1496 products found in 271 groups.
Ultima Fibre Optic Cleaning Buds
- Can be used to clean v-grooves in splicers
Ultima Box Connection 301A
- Designed to accept any 237 style 10 pair modules
- Lid has turnbuckle fixings and removable side panels
- Base is fitted with a 4-way screw terminal earth post and four cable management jumper rings
Ultima Box Connection 251A
- Designed to accept any 237 style 10 pair modules (sold separately)
- Lid has turnbuckle fixings and removable side panels
- Base is fitted with a 4 way screw terminal earth post and four cable management jumper rings
Ultima Distribution Frames 108A
- Frames can be mounted side by side, back to back, wall mounted or free standing
- Modular design
- Good cable and jumper management
Ultima Line Jack 3
- Designed to fit any standard single gang backbox
Ultima Cat5e RJ45 Plugs
- Unshielded and shielded options
- For recommended crimp tools see 785017 or 822107
- A full range of coloured boots are also available
Ultima Line Jack 4
- Designed to fit any standard 86mm x 86mm back box
- Minimum back box depth required is 22mm
- Two independent outlets with separate circuits of the same type
Ultima Cat5e Right Angle Patch Panels
- Vertical punch down terminations
- LSA punchdown
- Integral rear cable management
Ultima Cat5e Modules
- Protected labelling facility
- Low profile module 20mm deep
- Standard module 29mm deep
Ultima Cat5e U/UTP PVC Patch Leads
- 100% copper core, suitable for Power over Ethernet
- 26AWG stranded conductors
- Slim 4.4mm cable diameter
Ultima Flat Euro Faceplates
- Suitable for copper, fibre and AV modules
Ultima LJ6C Faceplates
- Suitable for copper, fibre and AV modules
Ultima Epoxy & Polish Fibre Optic Connectors
- Termination method: epoxy polish
- Insertion loss typically 0.3dB for MM & SM
- 3mm and 900µm boot options
Ultima Blanking Plates
- High quality ABS plastic
- Fill unused apertures in faceplates and floor boxes
Ultima ST Fibre Optic Adaptors
- Singlemode (yellow dust cap) and multimode (red or black dust cap)
- For mounting in fibre panels, wall boxes and fibre faceplates
Ultima SC Fibre Optic Adaptors
- Singlemode and Multimode available
- For mounting in fibre panels, wall boxes and fibre faceplates
Ultima OS2 Fibre Pigtails ST
- Low Smoke Zero Halogen jacket
- Bend-insensitive G657A2 (singlemode fibre)
- Strain relief boot to protect fibre
Ultima OS2 Fibre Pigtails SC
- Low Smoke Zero Halogen jacket
- Bend-insensitive G657A2 (singlemode fibre)
- Strain relief boot to protect fibre
Ultima OM1 Fibre Pigtails ST
- Low Smoke Zero Halogen jacket
- Strain relief boot to protect fibre
- Batch tracking with unique pigtail ID
Shop by code
Enter the product code here to find your product: