Wall Mount Data Cabinets (99 products)
For all your small LAN requirements, Comtec has a range of wall data cabinets with adjustable 19" profiles and lockable glass front doors. Wall boxes are available in a wide range of heights and depths. Perfect for locations where there isn't room for a full sized floor standing data cab. For Industrial and Outdoor locations, please check the Lande IP55 range.
99 products found in 32 groups.
Lande Door Key
- Replacement / Spare Key
- Can be used with Lande PROline and Ultima Flat Pack Wall Mount Cabinets
Lande Fan Kits
- These single and twin fan units provide forced ventilation to aid cooling
- Thermostat control allows fans to be set at the desired level
- Each Fan has an air flow capacity of 2,3-3 cubic metres of air per min
Lande IP55 Equipment Rails
- Additional set of 19" equipment rails to allow rear mounting options
- Supplied with fixings
Lande IP55 Safebox-B
- Monoblock welded construction, with polyester type powder coating (RAL7035 Light Grey)
- Sizes range from 7U to 16U, width 600mm and depths of 450mm or 600mm
- 7U & 9U models contain single point turn locking system, 12U & 16U contain 2 single point locking system. The lock systems accommodate a central cylinder lock which unlocks with a cylindrical key
Lande PROline Mounting Rails
- An additional set of 19" profiles for mounting in the rear of the 450mm deep Cabinet
- Fixings included
Lande PROline Retrofit 3 Digit Lock
- Retrofit lock handle with 3 mechanical digits (0 to 9)
- Overide pin location
Lande PROline Wall Mount Cabinets
- Available in heights of 7U, 9U, 12U, 16U & 20U and width of 600mm
- 450mm and 600mm depth options
- High quality design with a rigid structure
Lande Safebox-B Backplate
- Plates are pre-drilled with 6 rows of holes
- Easy mounting in rear with supplied fixings
Lande Safebox-B Double Fan
- For use with Lande Safebox-B IP55 Wall Mounting Cabinet
- For fitment in the top section
- Supplied as separate kit for customer onsite fitment and wiring
Lande Safebox-B Mounting Plinth
- 100mm high
- Complete with fixings to attach to Cabinet
Lande Safebox-B Pole Mounting Kit
- Brackets suitable for mounting around poles with 4" to 6" diameter
Lande Safebox-B Single Fan
- For use with Lande Safebox-B IP55 Wall Mounting Cabinet
- For fitment in the top section
- Supplied as separate kit for customer onsite fitment and wiring
PROline Rear Wall Mounting Section
- Available in 7U, 9U, 12U, 16U & 20U heights
- All are 150mm deep and 600mm wide
- Heavy duty welded frame construction, 2.0mm thickness
Quantum Minipatch 10 Cat5e Patch Panel
- 12 ports in 1U
- Rear punchdown termination
- Dual block LSA/110 punchdown
Ultima 2 Section Wall Boxes
- PLEASE NOTE THIS IS THE FINAL STOCK
- Lockable toughened glass door with quick release hinges
- Door can be hinged left or right
Ultima Adjustable Shelves
- Can be used for other 19" enclosures subject to mounting rail positions
Ultima Brush Cable Entry Panel
- Retrofittable by removing the existing blank panel
- Provides easier access for cable entry
Ultima Earth Grounding Kit for Flat Pack Wall Boxes
- Comprises of 3x earth leads and fixings
Shop by code
Enter the product code here to find your product: