3M Cold Shrink Insulator Sleeve
- Simple installation, requires no tools
- Accommodates a wide range of cable sizes
- No torches or heat required. Good thermal stability
External Cabling (466 products)
Why not check out Comtec's range of External cabling equipment, we have many lines in stock and ready for next day delivery. Step Ladders, Extension Ladders, Dome Closures, Heat-Shrink Closures, Wire Connectors, Lifting Keys, Spades, Joint Boxes... The list goes on, so why not check out online for more detail.
466 products found in 189 groups.
3M Fibre Optic Mechanical Closures
- Suitable for buried, underground, aerial, and pedestal applications
- Closure has two cable entrance ports on each end
- Port plugs allow the closure to be used for butt or in-line splices
3M High Gel Re-enterable Encapsulent 8882
- Enables easy cable splice re-entry for future changes and maintenance
- Has 100 to 110 minute gel time at 40 degrees F (4 degrees C)
- Adheres to filled cable and is compatible with the common plastics used in telephone splice connectors
3M One Step Closures
- Easy to install
- No gel
- Small closure (1to1 & 1to2) suitable for a maximum of 4 x 0.5mm pairs
3M Resin Closures
- Will accommodate in line and butt splices of up to 5 pair cable or coax
BT Cable Entry Covers
- BT Cover 101A covers cable entry on house wall (Cover dimensions 105mm x 78mm x 28mm)
- BT Capping 25 runs between connector bend 4 & cover 101A to enclose service cable
- BT Connector Bend 4 for use on housing estates to connect duct 102 or duct 56 to cover 101A
BT Coiled Duct Rod
- Also known as BT Duct Rod 3
- Please note, these can be supplied in black or yellow
BT Duct Rod Adaptors
- Also known as BT Adaptor Rod 1A, 2A, 3A, 5 and 7 respectively
BT Duct Rod Coupling Up Pieces
- Ferret versions also available
- 200127 - Also known as BT Coupling 1
- 991965 - Also known as BT Coupling 2
BT PVC Duct Rods
- The joint is commonly known as the ferret type which operates on the principles of a spring loaded pin engaging into a mating hole. When the joints are screwed together the trigger which is flush with the body of the joint is pressed for quick release
- Also known as BT Duct Rod 1, 2, and 5 respectively
- Fitted with ferret (triggerlock, i.e can be rotated in either direction) joints
BT Rod Attachment 1A
- Also known as BT Attachment Rod 1A
BT Rod Attachment 2A
- Also known as BT ATTACHMENT ROD 2A
BT Rod Attachment 3A
- Also known as BT Attachment Rod 3A
BT Rod Attachment 4A
- Also known as BT Attachment Rod 4A
BT Rod Duct No.3 Couplings
- Also known as BT Coupling Duct Rod 3 male, male swivel, female and reel respectively
CK MightyRod Cable Rod Sets
- 100% Splinter-proof rods gain without the pain..SpinterSHIELD is an advancement in cable rod technology. The durable SplinterSHIELD coating fully encases the inner fibreglass rod to prevent harmful splintering. No more gloves, no more painful splinters!
- Triple fixed mighty-fix connectors - Unsurpassed strength..Through the use of an innovative triple fixing system, the super tough zinc-plated steel Mighty-Fix connectors offer unsurpassed tensile strength in excess of 275kg. Furthermore, the ultra-slim profile reduces snagging and provides accessibility through smaller holes
Cable Bearer Brackets
- Also known as BT Bracket Cable Bearer 5, 8, and 12 respectively
Cable Bearers (Wall Type)
- For supporting cables in manholes and joint boxes. The type numbers indicate the number of brackets which the bearings will carry
- Also known as BT Cable Bearer Wall Type 2, 3, and 5 respectively
Cabling Guides 4A & 4B
- Also known as BT Guide Cabling 4A & 4B respectively
Shop by code
Enter the product code here to find your product: