Duct & Accessories (91 products)
91 products
found in 29 groups.
- BT Cover 101A covers cable entry on house wall (Cover dimensions 105mm x 78mm x 28mm)
- BT Capping 25 runs between connector bend 4 & cover 101A to enclose service cable
- BT Connector Bend 4 for use on housing estates to connect duct 102 or duct 56 to cover 101A
View 3 products
- Gas cylinders contain 16g of CO2 (can inflate a minimum of 3x TDUX-100 duct seals per cylinder)
- Supplied in packs of 10
View 1 product
- Suitable for use with plastic, concrete or steel ducting wall-feed through systems
- Can be used with polyethylene or lead-jacketed cables
- Various sizes available for sealing a wide range of ducts and cables
View 3 products
- Supplied with carry case
- TDUX Gas cylinders purchased separately (994388)
View 1 product
View 3 products
- Manufactured from virgin PVC-U polymer = 100% reliable performance
- Duct systems are manufactured to Industry Standard BSEN 61386
- Solid wall construction, capable of being back-filled with As Dug materials where appropriate and not affected by sharp stone impingement
View 3 products
- 53.9mm duct system also known as BT Duct 56, 96.5mm duct system also known as BT Duct 54D
View 10 products
- 53.9mm duct system also known as BT Duct 56, 96.5mm duct system also known as BT Duct 54D
View 2 products
- 53.9mm duct system also known as BT Duct 56, 96.5mm duct system also known as BT Duct 54D
View 1 product
- 53.9mm duct system also known as BT Duct 56, 96.5mm duct system also known as BT Duct 54D
View 3 products
- 53.9mm duct system also known as BT Duct 56, 96.5mm duct system also known as BT Duct 54D
View 2 products
- Main duct 96.5mm, tee duct 53.9mm
- 53.9mm duct system also known as BT Duct 56, 96.5mm duct system also known as BT Duct 54D
View 1 product
View 2 products
- High levels of gas and water tightness
- Resistant against water, alkaline, chemical agents
- Non corrosive
View 2 products
- Upto 2 bar pressure resistance
- 100Kg pulling force on the cables when sealed
- 10xd at 45°, with 1 bar pressure bending test
View 1 product
- Up to 4 hours fire resistance in transit frames (single side)
- Up to 4 hours fire resistance in ducts
- Tested to BS EN1366-3 2009
View 1 product
View 2 products
- For installation in waterproof concrete tank
- Coating merges seamlessly with the concrete
View 1 product
- Universal building entry with membrane injection system for drill holes in the most common types of wall
- Controlled ejection of resin through slit membrane hose
- Sealing lips ensure gentle seal for media lines
View 3 products
View 2 products
Shop by code
Enter the product code here to find your product:
