CommScope FOSC Fibre Optic Dome Closures
- Suitable for use in any environment (aerial, pedestal, buried and manhole)
- Cable seals feature a heat shrink sleeve and hotmelt adhesive system installed with a hot air gun
- Intended for low core count cables
Jointing Closures & Accessories (224 products)
224 products found in 47 groups.
CommScope MJC Accessories
- Branching Plugs - A range of plugs allowing various cable entry/exit options
- Blanking Plugs - For sealing unused branching ports
- Port Reducers - For adapting branching ports allowing further cable entry/exit option
CommScope MJC Mechanical Closures
- Gel type sealing system
- No special tools required
- Multiple branching possibilities
CommScope T2C Mechanical Closures
- Versatile gel closure bringing new levels of installation convenience and application flexibility
- Easy re-entry and re-closure
- Cable configuration changes possible with a minimum of extra accessories
CommScope TENIO Brackets
- For mounting enclosures and managing cables
CommScope TENIO Cable Seals
- 60 seconds assembly
- 100% wraparound mechanical seal
- Tool-less installation
CommScope TENIO Cable Termination Units
- CTU-S used with cable seals: TENIO-SKG5-2/4, TENIO-SKG4-3/6
- CTU-L used with cable seals: TENIO-SKG3-5/8, TENIO-SKG3-7/10, TENIO-SKG2-9/12, TENIO-SKG2-11/14, TENIO-SKG2-13/16, TENIO-SKG3-3/5x6/9
- Stronger than T-wraps, safer than hose clamps (no cable damage)
CommScope TENIO Fibre Closures
- Tool-less, intuitive design for rapid installation and easy on-going maintenance by a less technical workforce
- Modular closure platform allows phased network deployment, lower initial CAPEX expenditure
- Fibre and cable technology independent
Corning Closure Accessories
- Multiport CBT standoff bracket allows additional space between surface and CBT
- Pole and wall mount application
- Also allows mounting of Multiport CBT on a mobra arm (extra materials required)
Corning FTTx DualDrop OptiTap (UG) Fibre Cables
- SC/APC OptiTap connector
- ClearCurve singlemode fibre
- Designed for underground application and suitable for direct bury, duct, pole and aerial application
Corning Fibre Optic Mechanical Closures
- Suitable for buried, underground, aerial, and pedestal applications
- Closure has two cable entrance ports on each end
- Port plugs allow the closure to be used for butt or in-line splices
Corning High Gel Re-Enterable Encapsulent 8882
- Enables easy cable splice re-entry for future changes and maintenance
- Has 100 to 110 minute gel time at 40 degrees F (4 degrees C)
- Adheres to filled cable and is compatible with the common plastics used in telephone splice connectors
Corning One Step Closures
- Easy to install
- No gel
- Small closure (1 in/1 out & 1 in/2 out) suitable for a maximum of 4 x 0.5mm pairs
Corning OptiSheath MultiPort Terminal
- Utilises the OptiTap cable assembly connector port terminals (SC/APC)
- Pre-terminated with Corning SST flat dielectric drop cable
- Available in 4, 8 & 12 drop variations
Corning OptiSheath Multipurpose Enclosures (MPE)
- OptiTap cable assembly connector ports for customer drop terminations
- IP68 rated faster deployment either pole or underground application
- Suitable for pole mount, wall mount, chamber mount or direct bury installation
Corning ROC OptiTap Drop Cables
- SC/APC OptiTap connector
- CleareCurve singlemode fibre
- Designed for aerial and pole application
Corning Resin Closures
- Will accommodate in line and butt splices of up to 5 pair cable or coax
Dome Closure - Heat Shrink
- Also known as BT 31, & 32 Series, 100 pairs (BT 31B) or 200 pairs (BT 32K)
- Tube shrink size = 28-6mm
- For use with twisted pair voice cables
Dome Closure - Resin
- Also known as BT 30 & 32 series. 50 pairs (BT 30A) or 200 pairs (BT 32B)
- Includes all items for completing the joint except connectors (e.g. 8A/1)
- Resin pack 10B (789133) included in kit
Dome Closure Pole Mounting Brackets
- Rugged construction ensures secure mounting
- Weatherproof materials
Shop by code
Enter the product code here to find your product: