CTP Fibre Patch Panels - Sliding
- Adjustable mounting brackets
- Cable management kit included
- 19mm and 25mm cable entry ports on left and right hand side
Fibre Patch Panels (175 products)
175 products found in 39 groups.
Draka Fibre Patch Panels - Sliding
- Optimised design for easy fibre management.
- Can be installed in majority of racks and wall mounted enclosures
- Cable management supplied as standard
Fibre Optic Patch Panels - Fixed
- Metal chassis and front plate
- Suitable for use with FC adaptors
LANmark-OF Fibre Preloaded Patch Panels
- Sliding and tilting mechanism for ease of installation, upgrade and maintenance
- High density connectivity: up to 96 LC available on request
- Optimised for installation of Pre-Term with a cable gland and fibre management features
LANmark-OF Fibre Unloaded Patch Panels
- Accommodates 24 LANmark-OF snap-in adaptors
- Suitable for direct termination or splicing
- Comes with marking strips to number and categorise ports
Molex Lightband Fibre Panel Adapter Plates
- Plates accommodate up to 24 fibres
- Available with SC or LC adapters
- Options for singlemode or multimode
Molex Lightband Multi-Function Fibre Patch Panel
- Terminate up to 96 fibres in 1U
- Interchangeable front plates
- Mix copper and fibre on the same panel
NETCONNECT CO-FMD Pivoting Fibre Management Drawer
- Pivoting design enables splicing to be achieved without removing unit from the ODF
- Drawers can be configured for specific applications or a mixture of applications
- Patching only, using patch cords, connectorised breakouts (Hydra's) or inter facility cable
NETCONNECT CO-POSR Pivoting Optical Subrack
- Pivoting design to minimise fibre slack
- Patching only, using patch cords, connectorised breakouts (Hydra's) or inter facility cable
- Splicing of pigtails to loose tube cable, tight buffered cable, non connectorised intra facility or break-out cable and connecting to patching facility
NETCONNECT Fibre Patch Panels - Sliding
- Pre-installed dust covers on unpopulated ports
- Includes management and metric glands
- Supplied without splicing tray
NETCONNECT Fibre Patch Panels - Split Sliding
- Per port labelling
- Reinforced stainless steel casing
- Fibre connectivity 24 x MT-RJ or 24 x LC (multimode or singlemode)
SYSTIMAX 360 MP Patch Panels
- iPatch ready
- Rear cable management facility
SYSTIMAX 360 iPatch G2 Fibre Modules
- iPatch enabled
- Pre-terminated with MPO rear connectors to LC adaptors
- ABS polycarbonate chassis
SYSTIMAX 360 iPatch G2 High Density Sliding Fibre Patch Panel
- Hinged front cover
- UL 94 V-0 rated
SYSTIMAX 360 iPatch G2 LC Fibre Patch Panels
- Loaded with LC Duplex adaptors
- Suitable for singlemode and multimode fibre terminations
- Integral rear fibre management
SYSTIMAX 360G2 Cartridges
- Integral fibre management
- iPatch ready
- Hinged dust shutters on adaptors
SYSTIMAX 360G2 Cartridges with Pigtails
- Ready for splicing to incoming fibres
- Integral pigtail management
- iPatch ready
SYSTIMAX 360G2 Modular Cassette Patch Panels
- Accept four G2 modular cassettes
- Accept one InstaPATCH 360 data module or 360DP panel
- Accept two RoloSplices with three trays each
SYSTIMAX G2 1U Fibre Panels
- Accepts two RoloSplices with three trays each
- Available with fixed or sliding chassis
- Front plates to be ordered separately
Shop by code
Enter the product code here to find your product: