Commscope MPO Fibre Panels
- 19" rack mountable
- Accepts up to 4 x G2 Modules
- Modular sliding patch panels
MTP/MPO Solutions (63 products)
The MPO/MTP connectors are the preferred and standardised connector for massive parallel fibres. The MPO connector is the generic connector. MTP is the brand name of the leading manufacture USConec. The two variants are interchangeable with each other.
63 products found in 22 groups.
Draka UC-Connect MPO Cassettes
- Plug and play installation
- Maximum packing density
- Use with : 802145 chassis / panel
Draka UC-Connect MPO/MTP Patch Panel
- Plug and play installation
- Maximum packing density
- Use with : 802144 Module
LANmark-OF MTP OM4 Cassettes
- MTP to LC cassettes
- Low loss optical performance
- Easily mounted into Nexans Plug&Play patch panel
LANmark-OF MTP OS2 Cassettes
- MTP to LC cassettes
- Low loss optical performance
- Easily mounted into Nexans Plug&Play patch panel
LANmark-OF Plug&Play Patch Panels
- Holds up to 4 Plug&Play cassettes or adaptor plates in 1U
- Up to 96 fibres in 1U
- Sliding, tilting tray for ease of access
NETCONNECT Hi-D Modular Fibre Panel Accessories
- Allows G2 modules to fit into UCP panels
- Accepts one G2 module or adaptor pack
NETCONNECT Hi-D Sliding Modular Fibre Patch Panel
- Plexi transparent cover
- 4x Commscope G2 Module Cassettes or Adaptor Packs
- One pin splice tray fixation (splice tray not included, see 795770)
NETCONNECT MPO Cassette Blank
- Blanks unused ports in MPO patch panels
- Easy to fit and remove
NETCONNECT MPO Multimode OM3 Fibre Trunk Cable
- Factory pre-terminated assemblies
- Cables terminated with high density MPO connectors
- Trunks are equipped with midi fan-out and 3.2mm round cable MPO tails
NETCONNECT MPO Singlemode OS2 Fibre Trunk Cable
- Factory pre-terminated assemblies
- Cables terminated with high density MPO connectors
- Trunks are equipped with midi fan-out and 3.2mm round cable MPO tails
NETCONNECT MPOptimate Multimode OM4 Fan-Out Trunk Cable
- All products with protocol for constant and reliable quality
- Typical application intra rack equipment connections
NETCONNECT MPOptimate Multimode OM4 Fibre Trunk Cable
- Terminated with female MPO connectors
- Trunks are equipped with midi fan-out 3.2mm round cable MPO tails
- All tails are protected with transparent protection sleeve
SYSTIMAX InstaPATCH 360 MPO Trunk Cable LazrSPEED 550 (OM4)
- Factory terminated with MPO female connectors on each end
- LazrSPEED 550 OM4 fibre
- Manufactured to customer specified lengths - call for a quotation
SYSTIMAX InstaPATCH 360 MPO Trunk Cable TeraSPEED (OS2)
- Factory terminated with MPO female connectors on each end
- TeraSPEED OS2 fibre
- Manufactured to customer specified lengths - call for quotation
SYSTIMAX InstaPATCH 360 Pre-terminated Cassettes
- MPO to LC pre-terminated cassettes
- 12 or 24 fibres
- MPO male connectors on rear
Siemon MTP Fibre Cassettes
- Lanced Tabs - Provide convenient cable anchor points for incoming jacketed fiber cable
- Up to 3 Optional Splice Trays - Can be mounted to manage and protect either mechanical or fusion splices
- Label Holder - Protects fibre jumpers and is readily removable via release of factory-installed snap-latches
Ultima MTP Fan Out Cable With LC Tails
- Used to directly interconnect MTP trunk cables with active equipment saving rack space
- Easy deployment - factory terminated system saving installation and network configuration time
- Available in OM3, OM4 and OS2 variants
Ultima MTP Trunk Cable Assembly OM3
- Easy deployment - factory terminated modular system saving installation and network configuration time
- Available in 12 fibre and 24 fibre options
- Other lengths available
Shop by code
Enter the product code here to find your product: