Splicing, Termination & Fixings (53 products)
53 products found in 21 groups.
Fibre Optic Lapping Film
- Supplied in packs of 50
LANmark-OF Splice Cassette Tray
- Designed for use with both loose tube and tight buffer cables
- When the splice cassettes are stacked only the top splice cassette requires a cover
LANmark-OF Splice Holder
- Can retain up to 48 fusion splices if loaded with 4 splices per slot
- Recommended to load the holder with up to 24 splices (2 per slot) for easier maintenance
- Label supplied for identification
LANmark-OF Splice Protector
- Compatible with tight buffer or loose tube cables, i.e. 250 and 900 um coated fibres
- Compatible with tight buffer and maxistrip pigtails
LANmark-OF Splicing Accessories
- Duplex Splitter enables fibres in a single loose tube cable to be broken out in to two bend limiting tubes
- Bend limiting tubing can be used to protect 250µm buffered fibres in patch panels and enclosures
Loctite Activator Cold Cure 7649
- For use with 777163
- Ideal for field termination of epoxy polish connectors
Loctite Adhesive Cold Cure 638
- For use with 777164
- Ideal for field termination of epoxy polish connectors
NETCONNECT Fibre Optic Management Star
- Self adhesive
NETCONNECT Splice Protector
- Heat shrink polymer tube with stainless steel rod
Resintech Resin Epoxy Heat Curing RT153FC
- Easy to dispense into a syringe for connector gluing
Ripley Fibre Optic Sharp Bins
- Features a sliding lid
- Can be incinerated when full
SYSTIMAX Fibre Patch Panel Accessories
- For managing fibres and splices
Ultima Fibre Laser Warning Label
- Bright yellow background
- Self adhisive backing
- Available in two different sizes
Ultima Fibre Splice Trays
- Can be used to hold up to 24x 60mm splice protectors, or up to 12x 40mm splice protectors
- Integral fibre management
- Supplied with lid to protect fibres
Ultima Micro Splice Protectors
- Heat shrinkable polymer tube
- Supplied in a pack of 12 pieces
Ultima Splice Holders
- Ideal for use in patch panels or enclosures
- Provide high packing density
- 24-way holders have lid and splice designation label
Ultima Splice Protector
- Heat shrink polymer tube with rigid stainless steel bar
Ultima Syringes
- Needle and syringe screw together
- Epoxy is delivered to the rear of the ferrule without trapping air bubbles
- Suitable for directly loading from epoxy bi-packs
Shop by code
Enter the product code here to find your product: