Fixings & Accessories (91 products)
91 products found in 21 groups.
Corefix Heavy Duty Fixings
- Suitable for most modern homes with plasterboard / dot & dab walls
- Trusted and independently tested incredibly strong fixing, 100kg safe working load*
- Fast installation, no specialist tools required, drill, 10mm bit, hammer & screwdriver
DeWalt Wall Dog Screws
- No plug needed
Hollow Wall Anchor
- For be results use with setting tool
JCP Spin In Resin Anchors
- Faster installation than pumping resins
- Exact measure of resin required for each application
- Either end can be inserted into the hole
Schneider Countersunk Wood Screws
- Countersunk recessed head
- Suitable for wood, plastic and nylon wall plugs
Ultima Countersunk Wood Screws
- Countersunk recessed head
- Suitable for wood, plastic and nylon wall plugs
Ultima Roundhead Wood Screws
- Fully threaded with single thread
Unifix AnkerBolts - Flange Head
- Simply drill a hole the same size as the Thunderbolt into the material. Ensure the hole is a little deeper than the bolt to allow for dust - see technical info
- Remove any loose dust from the hole
- Screw in the Thunderbolt with a socket wrench. Apply a slight downward pressure to start the self-tapping action, as you would with a woodscrew
Unifix AnkerBolts - Hex Head
- Simply drill a hole the same size as the Thunderbolt into the material. Ensure the hole is a little deeper than the bolt to allow for dust - see technical info
- Remove any loose dust from the hole
- Screw in the Thunderbolt with a socket wrench. Apply a slight downward pressure to start the self-tapping action, as you would with a woodscrew
Unifix Concrete Screws
- Ideal for fixing uPVC and timber frames directly to masonry
Unifix Countersunk General Purpose Screw
- Zinc yellow plated
- Single thread
- General purpose screw
Unifix Driva Wall Plugs
- For use in plasterboard
- Simply screw in place using a screwdriver
Unifix Drywall Screws
- Self drilling
- Bugle head
Unifix Hinged Domecap Screw Cover
- Snap close
- For size 6 to 8 gauge screws
Unifix Masonry Anchor - Loose Bolt
- Heavy duty anchor bolts for floor fixing
Unifix Masonry Anchor - Projecting Bolts
- Projecting bolt for wall fixings
Unifix Nylon Frame Fixings
- Can be used for fixing wall boxes to masonry or concrete
Unifix Thunderbolt Masonry Anchor
- 1. Simply drill a hole the same size as the Thunderbolt into the material. Ensure the hole is a little deeper than the bolt to allow for dust - see technical info
- 2. Remove any loose dust from the hole
- 3. Screw in the Thunderbolt with a socket wrench. Apply a slight downward pressure to start the self-tapping action, as you would with a woodscrew
Shop by code
Enter the product code here to find your product: