Ideal Industries FT-45 Cat5e Plugs
- Reduce errors - check wiring sequence before crimping
- Easy to use - no need to cut wires to a specific length
- Improved wire stability - 3 contact prongs into every wire
Plugs & Boots (56 products)
Comtec can supply a wide range of Cat3, Cat5e, Cat6 and Cat6A RJ45 plugs. There are options for shielded or unshielded plugs and contacts for solid or stranded conductors. Also available are a range of boots in a variety of colours with strain relief for any cable diameter.
56 products found in 14 groups.
Ideal Industries FT-45 Cat6 Plugs
- Reduce errors - check wiring sequence before crimping
- Easy to use - no need to cut wires to a specific length
- Improved wire stability - 3 contact prongs into every wire
LANmark Field Termination Cat6A Plug
- Robust industrial design
- Fully shielded
- Field terminable using IDC technology
NETCONNECT Cat3 & Cat5 RJ45 Modular Plugs
- This plug can be used with the 569875 series cable boots
- Use the Pro-Installer tool with the Black dot die set or Dual Terminator (1320840) with terminating module (856196-2)
NETCONNECT Cat5e RJ45 Modular Plugs
- Can be used with the AMP Netconnect 569875 series cable boots
- Use the Pro-Installer tool with the White dot die set or Dual Terminator (1320840) with terminating module (1-856196-1)
NETCONNECT Cat6 RJ45 Plugs
- These plug types utilise the 2153256 or 2153257 series plug boots
- Use the Pro-Crimper III Hand Tool (354940-1) with the appropriate die set based on strain relief diameter or Dual Terminator (1320840) with terminating module (791804-X)
NETCONNECT Cat6A RJ45 Plugs
- These plug types utilise the 2153256 or 2153257 series plug boots
- Use the Pro-Crimper III Hand Tool (354940-1) with the appropriate die set based on strain relief diameter or Dual Terminator (1320840) with terminating module (791804-X)
NETCONNECT Strain Relief Moulded Boot
- Integral latch protection and bend limiting boot
- Available in two different cable entry sizes
- Available in a range of colours
NETCONNECT Strain Relief Slimline Boot
- Cable diameter 4.7mm to 6mm
- Suitable for use with 804664
Ultima Cat5e RJ45 Plugs
- Uses standard RJ45 8P8C crimp tool (see 994778)
- Easy to terminate
Ultima Cat6 Plugs
- Terminate using standard 8P8C crimp tool
- Multi-part plug has separate wire guide
- Suitable for use with solid core and stranded conductors
Ultima Cat6A Field Assembly RJ45 Plugs
- Suitable for stranded cable (AWG22-27) or solid cable (AWG22-26)
- Transmission performance exceeds the requirements of Cat6A/Class EA
- Re-terminate up to 5 times
Ultima Cat6A RJ45 Plugs
- Contact blades are suitable for stranded or solid wire
- 2 part plug designed for large overall diameter cable
- Suitable for round Cat6/6A shielded cables to 7mm OD
Ultima Strain Relief Moulded Boot
- Strain relief moulded boots for RJ45 connectors
- Suitable for use with cables with an OD of up to 5.8mm
- 793048 suitable for cables with an OD of up to 8mm
Shop by code
Enter the product code here to find your product: