Power Meters and Adaptors (28 products)
Power meters are used to measure the power of the light leaving the end of a fibre. They are used in conjunction with a light source in order to determine the amount of power lost along a fibre optic link. A range of adaptors are available to convert the power meter port to accept all of the common connector types
28 products
found in 17 groups.
Detect multiple wavelengths automatically - no setup required Detects GPON, XGS-PON, and Video signals at the same time Rugged and water resistant design with IP54 rating
View 1 product
Rugged & dependable Wave ID (auto wavelength identification and switching) Power measurements in dBm or µW; insertion loss in dB
View 1 product
850/980/1300/1310/1490/1550/1625nm Wave ID (auto-identification and switching) Multiple wavelength testing
View 1 product
Simple screw fitting - no tools required
View 5 products
Measurement Range -70 to +10dBm 2.5mm universal interface that supports FC/SC/ST connector types More than 80 hours of continuous battery life
View 1 product
High performance optical measurements Auto wavelength and reference level capability when used in combination with ComSonics laser sources 270Hz, 1kHz, 2kHz tone detection
View 1 product
Simple screw fit Easy to fit and remove
View 1 product
Wavelengths [nm] : 850/1300/1310/1490/1550/1625 Detection type : InGaAs Accuracy : + -0.01 dBm
View 1 product
Supplied as a pair of adaptors Suitable for use on the CertiFiber Pro and OptiFiber Pro ports Simple screw fit, no tools required
View 4 products
Supplied with FC and SC adaptors Calibrated for 850/980/1300/1310/1490/1550/1625nm wavelengths Accurate to +/- 0.2dB
View 2 products
Wide measurement range (+6 to -70dBm) Optional VFL for safe and effective fault locating Singlemode and multimode compatible
View 1 product
Measure optical power down to -65dBm InGaAs detector for maximum sensitivity Calibrated wavelengths for 850, 1300, 1310, 1490, 1550 and 1625nm
View 1 product
High accuracy to measure specific channel wavelengths Eliminates the need for expensive DWDM power meters Insertion loss <0.1dB
View 4 products
Single test port connection with SC adapter for dual wavelength measurement Selective power level measurements for both G/E-PON and XGS-PON/10G-EPON services Storage for > 1000 test results
View 1 product
Measurement of optical power (absolute and relative) Measurement of optical insertion loss together with a VIAVI optical light source Inspection of optical connectors
View 1 product
Wavelength-selective, through-mode power meter for B-PON, E-PON, G-PON, XGS-PON and 10G-EPON networks Available in 1310/1490 nm, 1310/1490/1550nm and 1270/1310/1490/1577nm versions Automatic ODN class detection and power-level pass/fail analysis
View 1 product
Designed for outdoor use Low power consumption Instant on
View 1 product
Shop by code
Enter the product code here to find your product: