Bosch SDS Chuck Adaptor Kits
- Converts SDS to standard keyed chuck adaptor
Drill Bits & Holesaws (128 products)
128 products found in 21 groups.
CK Holesaw Arbor
- Complete with shaft locking grub screw
- For use with holesaws up to 30mm
- 8mm or 11mm hexagonal drive shaft
CK Holesaw Arbor Extension
- Complete with shaft locking grub screw
CK Holesaw Arbor Heavy Duty
- Fixing pins are locked in place with a screw down collar securing the holesaw for heavy duty use
- 11mm hexagonal drive shaft
- Supplied with replaceable 1/4 HSS pilot drill
CK Holesaw Arbor Quick Release
- Fixing pins are spring loaded for easy withdrawal making holesaw changes fast and efficient
- 11mm hexagonal drive shaft
- Supplied with replaceable 1/4 HSS pilot drill
CK Holesaws
- Arbor for 14mm to 30mm holesaws with HSS Drill, use 784604 (8mm hex shank) or 784611 (11mm hex shank)
- Arbor for 32mm to 152mm holesaws with HSS Drill, use 784617 (11mm hex shank)
- Arbor for 14mm to 30mm holesaws with SDS Drill, use 784622
CK Pilot Drills
- Suitable for 784604, 784622, & 784624
HSS Cone Cutter
- 6mm to 30mm in 2mm increments
SDS Chuck Adaptor Kits
- Converts SDS to standard keyed chuck adaptor
Ultima Flat Wood Drill Bit
- Extended service life
- For drilling timber and laminated panels
- Hex shank
Ultima Flat Wood Drill Bit Set
- Extra sharp centre point and angled cutting edges, excellent for drilling into hard and soft woods
- Hex shank
- Sizes 10, 16, 20, 22, 25 and 32mm
Ultima Flat Wood Drill Bits - Extra Long
- Precision ground point with angled cutting edges for faster, cleaner cutting
- For hardwood, softwood, end grain, cross grain and laminated panels
- Hex drive for use with hand or power drills
Ultima HSS Drill Bits Straight Shank Metric Jobber
- Black oxide finish
Ultima Holesaw Kit
- Hardened HSS teeth, flexible high carbon steel backing
- For cast steel, malleable cast iron, stainless and structural steel, alloyed and non-alloyed aluminium, bronze, copper, PVC, acrylic and wood
- Contains: 18, 20, 25, 32, 40 and 51mm holesaws
Ultima Masonry Drill Bits
- For use with rotary or percussion drills
- Milled slow spiral for quick and effective debris removal
Ultima Metric Jobber HSS Drill Bit Sets
- Contains 2-8mm in 0.5mm increments in a durable plastic case
Ultima SDS Hammer Drill Bits
- Tungsten carbide tipped. High standard, double flute for efficient debris removal
- For concrete, masonry, lightweight block and stone
Ultima SDS-Plus Masonry 3 Piece Drill Bit Set
- Sizes: 12, 16 and 24mm
- For use on concrete, masonry, lightweight block and stone
- 1000mm long
Shop by code
Enter the product code here to find your product: