Appleby Cavity Wall Boxes
- Large flange around front prevents slipping into cavity and matches profile of accessory front plate
- Manufactured from flame retardant thermoplastic
- Tough yellow nylon lugs have large bearing faces for superior strength
Trunking & Cable Management (1063 products)
Comtec has a wide range of product to support your every cabling need, from mini to maxi trunking, back boxes and pod boxes to floor boxes, we have it all. If you're looking to run your cable under a raised floor we even have basket and floor matting, from leading brands including Ultima.
1063 products found in 279 groups.
Armorduct Basket Tray Clamp Kit
- 4 part clamp kit
- Universal size
- Bright zinc plate finish
Armorduct Basket Tray Couplers
- Quick fit basket tray couplers, channel fixing and splice plate
- 33mm and 60mm coupler options
Armorduct Basket Tray Hold Down Clamps
- Pre-galvanised finish
- M8 hole size
- Hold down and central support options
Armorduct Basket Trays (110mm)
- Basket height 110mm
- Also available in 35mm and 60mm heights
- For coupling use splice plate AMSP (806544)
Armorduct Basket Trays (35mm)
- Basket height 35mm
- Also available in 60mm and 110mm heights
- For coupling use fast coupler AMQC35 (806550)
Armorduct Basket Trays (60mm)
- Basket height 60mm
- Also available in 35mm and 110mm heights
- For coupling use fast coupler AMQC60 (792955)
Armorduct Cable Tray Couplers
- Pre-galvanised finish
- Medium or heavy duty options
- Available straight or angled
Armorduct Cable Tray Flat Bends
- Pre-galvanised finish
- Medium or heavy duty options
- 40 or 90 degree angles
Armorduct Cable Tray Risers
- Can be used to make an inside or outside angle
Armorduct Cable Tray Stand Off Brackets
- Stand-off depth is 50mm
Armorduct Cable Trays (Heavy Duty)
- Cable trays have been tested and manufactured in accordance with EN 61537:2007
- Couplers are not provided as standard and should be ordered separately
- Nuts and bolts not supplied and should be ordered separately. See roofing bolts in our fixings section
Armorduct Cable Trays (Medium Duty)
- Cable trays have been tested and manufactured in accordance with EN 61537:2007
- Couplers are not provided as standard and should be ordered separately
- Nuts and bolts not supplied and should be ordered separately. See roofing bolts in our fixings section
Armorduct Steel Trunking
- Both the lid and body are supplied in 3Mtr lengths complete with coupler and all necessary fixing screws
- Meet the requirements of EN 50085-1:2005 and EN 50085-2-1:2006
- Mild steel pre galvanised
Armorduct Steel Trunking Bends - Inside Lid
- Available in 45 degree and 90 degree options
Armorduct Steel Trunking Bends - Outside Lid
- Available in 45 degree and 90 degree options
Armorduct Steel Trunking Bends - Top Lid
- Available in 45 degree and 90 degree options
Armorduct Steel Trunking Couplers
- Used for joining two pieces of trunking
Armorduct Steel Trunking End Caps
- Pre-galvanised finish
- 50x50mm, 75x75mm, 100x100mm and 150x150mm options
- Supplied with fixing screws
Shop by code
Enter the product code here to find your product: