FiberGuide Accessories
- Flexible tubing is 2 inches in diameter and attaches to the end of a straight section with an adaptor
Fibre Ducting Systems (284 products)
Comtec offers 3 leading Fibre Ducting Systems from ADC Commscope, Gigaduct & Warren & Brown
284 products found in 56 groups.
FiberGuide Downspout Covers
- Retro fit item, can be installed after initial system has been completed
- For use with the 4x4 inch and 4x6 inch downspouts only
FiberGuide Downspouts
- Rounded corners prevent damage to fibre
- Partition wall in duct helps to manage fibres
FiberGuide End Caps
- Prevent fibre cables from spilling from FiberGuide duct
- Easy to fit and remove
FiberGuide Expandable Straights
- Sliding design bridges gaps without cutting and joining
FiberGuide Express Exits
- Kits include insertable exit fins and removable rear cable guides
- Guarantees 2 inch bend radius protection
FiberGuide Horizontal Bend Covers
- Provide protection of fibre cables
- Prevent cables from spilling out of FiberGuide duct
- Easy to fit and remove
FiberGuide Horizontal Bends
- Snap-on covers available separately
FiberGuide Horizontal Cross Piece Covers
- Protect fibre optic cables
- Prevent cables from spilling from FiberGude duct
- Easy to fit and remove
FiberGuide Horizontal Cross Pieces
- Snap-on covers available separately
FiberGuide Horizontal Tee Piece Covers
- Protects fibre optic cables
- Prevents cables from spilling from FiberGuide duct
- Easy to fit and remove
FiberGuide Horizontal Tee Pieces
- Snap-on covers available separately
FiberGuide Junctions & Snap-Fits
- No tools are required for installation or removal
- A warning label indicating caution around fibre optic cable is included
- Snap-fit junctions exhibit superior holding force and accommodates support brackets
FiberGuide Raceway Tools
- 816606 - Mitre box including saw for the cutting of 2x2in, 4x4in, 4x6in and 4x12in straight sections to size
- 801073 - Cut-in T fixture for use with 4in, 6in and 12in straight sections
FiberGuide Straight Adaptors
- Enable sections of FiberGuide with different profiles to be joined together
- Snap-fit design
FiberGuide Straight Section Covers
- Hinged cover kits include mounting hinges and clips
- Snap-on covers include capture clips with mounting clasps
FiberGuide Straight Sections
- Available in 6ft lengths
- Carries fibres horizontally throughout the system
- Can be installed vertically when routing around obstacles
FiberGuide Support Brackets
- Supplied with necessary fixings
FiberGuide Trumpet Flares
- Provide bend radius protection
- Allow a large number of fibre patch leads to transition into a fibre bay
- A 4x4 trumpet flare is used for the 4x4 and 4x6 downspouts
FiberGuide Vertical Bend Covers
- Provide protection to fibre optic cables
- Prevent cables from spilling from FiberGuide duct
- Easy to fit and remove
Shop by code
Enter the product code here to find your product: